|
Three
Steps To
Improved Green Sand Moisture Control
...
Only With The Lippke SANDSTARTM Moisture Control System
Step 1: Data Capture
Step 2: Data Processing
Step 3: Precision Metering
The Lippke SANDSTARTM molding sand moisture control systems
assure exact moisture content of the mixed sand - every time!
Lippke Systems, proven in numerous applications for the past 37 years,
not only determine moisture content and temperature of the return sand
but also measure it’s density as a compensating factor.
Lippke Systems are designed to assure optimum final moisture content
and constant bulk density, which is known to have a decisive influence
on moldability.
The Lippke process differs from other known conventional moisture
control systems by measuring return sand properties before the mixer.
Knowing the actual condition of the return sand and comparing such data
to desired prepared sand conditions allows calculation and addition of
the optimum water quantity to each batch (or continuous) mixer
operation, without extending the mixing time.
All data collection and computations are done automatically resulting
in improved quality sand and higher production rates.
For more information and a no obligation quotation contact KLEIN.
 |
| Lippke
SANDSTARTM System for Dual Mixer Installation |
| 1
- Central Processor |
5
- Weigh Hopper |
| 2
- Thermocouple |
6
- Shut-off valve |
| 3
- Electronic Unit |
7
- Strainer |
| 4
- Moisture Probe |
8
- Water Meter |
|
